Stupid windows XP - Page 2

Rohanna · 11-06-2006, 08:54 PM

Uggg... that was the same exact problem I had... it looped before windows would ever start up....wish I had a fix for you.. mine was get a new computer..lol Spent over 90 hours trying to fix it to no avail.. tried everything I possibly could.

Vicious · 11-06-2006, 09:04 PM

Error caused by a device driver

Thank you for sending an error report to Microsoft.

Error report summary

Error type : Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart
Cause : Unknown device driver
Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible

Information about this error

You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.

Next steps

We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem.

Rohanna · 11-06-2006, 09:07 PM

go back into safe mode... remove your drivers and re-install drivers that came with your hardware.. then try restarting.

Vicious · 11-07-2006, 01:39 AM

how do u go in safe mode?

Vicious · 11-07-2006, 02:21 PM

couldnt figure out the safe mode... but im on my new comp writing this, i installed the drivers differently, something is wrong im sure, im just waiting for my comp to shut down... its only a matter of time...

Vicious · 11-08-2006, 10:26 AM

So... yah its shut off after about 30 minutes.. Fixable or should I take it into a comp repair place?

Melkorus · 11-09-2006, 01:17 AM

your new PC or old one?

Also, did you downclock everything to stock speed? Man I wish I was there to take a look at it. You can probably fix it yourself, those shops will rip you off (unless you "know a guy"). If you could provide me with details I could better analyze and give you instructions. Details are important, like what happened, when did it all start, at what point of what process does what happen, what devices/hardware you have installed/connected, what happens when you do x, think writing detailed history of and analysis of your PC, in chronological order. Feel free to send me PM.

Edit: also, to go into safe mode, press right F8 before your PC starts loading WinXP (during that blank screen right before win xp loading graphics show).

Wild-Bill · 11-15-2006, 08:13 AM

Sounds like a possible issue in your BIOS... Like others have been saying...go into the BIOS and make sure things are down-clocked. Check the FSB speed and your memory speeds in there as well. You might also want to try taking out one stick of memory and run things for a day or two..then the other stick. This is just to see if the memory is defective (memtest also finds this out). Just some things to try

11-06-2006, 09:04 PM	#12 (permalink)
Vicious Registered User Join Date: Jul 2006 Location: College Station, Texas Posts: 208	Error caused by a device driver Thank you for sending an error report to Microsoft. Error report summary Error type : Windows stop error (A message appears on a blue screen with error code information) Solution available? : No (see Next steps) What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart Cause : Unknown device driver Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED) Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible Information about this error You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer. Next steps We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem. __________________ *Vicious-Hellrazor*

11-07-2006, 01:39 AM	#14 (permalink)
Vicious Registered User Join Date: Jul 2006 Location: College Station, Texas Posts: 208	how do u go in safe mode? __________________ *Vicious-Hellrazor*

11-07-2006, 02:21 PM	#15 (permalink)
Vicious Registered User Join Date: Jul 2006 Location: College Station, Texas Posts: 208	couldnt figure out the safe mode... but im on my new comp writing this, i installed the drivers differently, something is wrong im sure, im just waiting for my comp to shut down... its only a matter of time... __________________ *Vicious-Hellrazor*

11-08-2006, 10:26 AM	#16 (permalink)
Vicious Registered User Join Date: Jul 2006 Location: College Station, Texas Posts: 208	So... yah its shut off after about 30 minutes.. Fixable or should I take it into a comp repair place? __________________ *Vicious-Hellrazor*

11-09-2006, 01:17 AM	#17 (permalink)
Melkorus The Old Timer Join Date: Dec 2005 Location: St. Louis Posts: 4,185	your new PC or old one? Also, did you downclock everything to stock speed? Man I wish I was there to take a look at it. You can probably fix it yourself, those shops will rip you off (unless you "know a guy"). If you could provide me with details I could better analyze and give you instructions. Details are important, like what happened, when did it all start, at what point of what process does what happen, what devices/hardware you have installed/connected, what happens when you do x, think writing detailed history of and analysis of your PC, in chronological order. Feel free to send me PM. Edit: also, to go into safe mode, press right F8 before your PC starts loading WinXP (during that blank screen right before win xp loading graphics show). __________________ Last edited by Melkorus; 11-09-2006 at 01:20 AM.

11-06-2006, 08:54 PM	#11 (permalink)
Rohanna Banned Join Date: May 2006 Location: From NY live in Indy Posts: 1,259	Uggg... that was the same exact problem I had... it looped before windows would ever start up....wish I had a fix for you.. mine was get a new computer..lol Spent over 90 hours trying to fix it to no avail.. tried everything I possibly could.

11-06-2006, 09:07 PM	#13 (permalink)
Rohanna Banned Join Date: May 2006 Location: From NY live in Indy Posts: 1,259	go back into safe mode... remove your drivers and re-install drivers that came with your hardware.. then try restarting.

11-15-2006, 08:13 AM	#18 (permalink)
Wild-Bill Some like it hot Join Date: May 2006 Location: Indiana Posts: 357	Sounds like a possible issue in your BIOS... Like others have been saying...go into the BIOS and make sure things are down-clocked. Check the FSB speed and your memory speeds in there as well. You might also want to try taking out one stick of memory and run things for a day or two..then the other stick. This is just to see if the memory is defective (memtest also finds this out). Just some things to try __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode